 |
| Quantity: | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Product Description
A 60-75 kg powder bonding machine is the production scale answer for manufacturers who need dependable metallic effect powder coating in daily batches above the small trial level. The system pairs a 200 L hot mixing chamber with an 800 L cold mixing chamber, so operators can blend aluminum flakes or other metallic pigments onto resin powder at controlled temperature, then cool and stabilize the bonded powder before it moves to sieving and packing. Chenxing Machinery builds this unit for coating plants that keep regular output running while still switching colors and formulations without long cleaning stops.
The machine sits inside the wider mixer unit range of the Chenxing factory program, and it works naturally with powder compounding machinery and automatic compounding solutions when a customer wants a fully connected dosing line. For raw material feeding, operators can pair it with powder loading equipment or a continuous powder conveying arrangement that keeps the hot mixer topped up between batches.
Metallic powder coating fails when the pigment flakes break, overheat, or separate from the resin carrier. The Chenxing 60-75 kg unit avoids these faults with a two stage thermal cycle. Inside the hot mixer, the agitator heats the resin powder close to its softening point while the metallic flakes are added in a controlled sequence, so each flake receives an even resin coat. The batch then drops into the cold mixer, where high speed blades and water assisted cooling pull the temperature down quickly and stop further fusion.
This working principle keeps the bonded powder free flowing, evenly colored, and stable on the shelf. Every critical value, from hot mixing temperature to cold discharge temperature, is watched by the PLC. The touch screen stores up to 400 recipes, which is practical for a plant that runs many metallic shades in one week. Operators can also enable remote maintenance through the network port, letting the Chenxing service team check settings from a distance without stopping production.
A typical batch on the 60-75 kg machine takes about 15 to 20 minutes from resin loading to cold discharge, which supports a practical hourly throughput of 200-300 kg depending on the formulation. The operator calls up a recipe, weighs the resin powder into the hot mixer, starts heating, adds the metallic pigment at the programmed moment, and waits for the automatic discharge signal. The whole sequence is one click start, so a single worker can supervise the line while also managing packing.
The unit is built to sit inside an existing industry applications layout rather than forcing a new building. Its footprint is about 7 m by 5 m with a height around 5 m, and the total connected power is roughly 60 kW. Because the hot and cold mixers are separated, cleaning between color changes is faster than on a single chamber machine, and the support equipment range from Chenxing can add sieves, conveyors, and packing stations as the coating plant grows.
The 60-75 kg class is the workhorse choice for medium size powder coating producers and for larger plants that prefer several dedicated bonding units over one oversized machine. It delivers strong daily output without demanding the floor space or capital of a fully automated compounding hall, and it remains easy to operate for teams that already run standard powder lines.
Plants that also produce profiles, sheets, pipes, or panels benefit from keeping bonding capacity in house. The Chenxing catalog gives the same factory the machinery for profile extrusion machinery, profile system solutions, board and sheet lines, marble sheet equipment, and a wide selection of pipe extrusion line machinery plus extrusion line solutions. For metal-look finishing, the bonding machine supplies the powder while PVC pipe production and HDPE production lines shape the substrate, with HDPE pipe systems available for larger diameter work.
Because the machine handles both standard resin powders and metallic blends, it supports RAL style color matching for architectural, appliance, and furniture finishing. The 400 recipe memory means each customer color stays reproducible, which matters when a coating plant must deliver the same metallic shade month after month.
Chenxing Machinery treats every bonding unit as a configurable project, not a fixed model. The standard build comes with nitrogen protection for sensitive pigments, automatic temperature detection, and remote maintenance as factory standard, but the customer can choose how far to extend the line.
Common options include a stainless steel contact surface, a wider cold mixer for faster cooling, integrated dosing scales for the metallic pigment, extra sieving stages, and a finished powder packing station. The control package can be extended to connect with the plant ERP, and the recipe library can be preloaded with the customer own shades before shipment. For factories that plan a complete compounding hall, the machine links into engineering solutions and EPC engineering projects, where Chenxing handles layout, piping, and commissioning together. Non-standard pipe or profile applications can also be discussed through specialty pipe lines engineering support.
The 60-75 kg powder bonding machine is assembled under the same quality routine as the rest of the Chenxing production program, which is certified to ISO9001 and meets CE requirements for the European market. The mixer shell and blades are made from wear resistant materials that tolerate abrasive metallic pigments, and the seal design keeps dust inside the chamber where it belongs.
Temperature control is the heart of reliable bonding. The PLC compares actual chamber temperature against the recipe target continuously, and the automatic detection system flags any drift before the batch is ruined. Because the hot and cold chambers are built as separate units, thermal stress stays lower than on combined machines, which supports a longer service life. Buyers can read the factory background in the Chenxing company profile and ask for the complete quality certificate package together with the machine documentation.
Every 60-75 kg bonding machine leaves the Chenxing workshop after a full functional test with real powder batches. The unit ships in several crates sized for standard containers, and the Chenxing team supplies a detailed layout drawing so the customer can prepare the floor before arrival. Installation supervision and operator training are available either on site or through remote video sessions, and the technical documents cover wiring, maintenance, and recipe setting in English.
Spare parts for the mixer blades, seals, and control components are stocked for fast dispatch, and the factory updates page shows recent machine developments. Customers can compare the complete machine portfolio and the complete machinery list before ordering, and any technical question can be checked against the machine support FAQ. For a direct price and delivery date for the 60-75 kg model, the fastest route is the bonding machine quote request form or an email to Nicole at ceo@cxsljx.com, with the phone line +86 159 5118 7228 open for urgent calls.
The machine is designed for batches of 60 to 75 kg of finished bonded powder, with the hot mixer rated at 200 L and the cold mixer at 800 L.
A normal production run delivers 200 to 300 kg per hour, depending on the pigment type, resin formula, and cooling time required.
The hot mixer applies the resin coat onto the metallic flakes, and the cold mixer cools the bonded powder quickly so the flakes stay intact and the powder remains free flowing.
Aluminum flakes and most metallic effect pigments used in powder coating can be bonded here, and the nitrogen protection option helps with sensitive or easily oxidized materials.
A typical batch runs for about 15 to 20 minutes from resin loading to cold discharge, which is why several batches can be completed in a standard work shift.
Yes, the PLC touch screen stores up to 400 recipes, so metallic shades and customer specific colors can be recalled with one click start.
It works well beside profile and pipe extrusion lines because the coating plant can bond its own metallic powders instead of buying ready mixed material.
Automatic temperature detection, nitrogen protection, interlocked covers, and an emergency stop are included, and the electrical system follows CE requirements.
Installation normally takes a few days with the Chenxing engineer, and operator training is completed at the same time, either on site or by remote video.
Send an inquiry to Nicole at ceo@cxsljx.com or call +86 159 5118 7228, and the Chenxing team will reply with the quotation, lead time, and shipping options.
To receive a quotation for the 60-75 kg powder bonding machine, please tell us your target powder type, batch size, hourly output goal, and destination port. The Chenxing sales team normally answers within 24 hours with the machine price, delivery schedule, and installation plan.
Request a quote and technical data directly on the product page: view more machine details.
