| Availability: | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Quantity: | |||||||||
chenxing
Product Description
The Plastic Film Screw Press Squeezer and Densifier is designed for dewatering and densifying washed plastic films in plastic recycling operations. It is suitable for processing lightweight materials such as PE films, PP woven bags, agricultural films and non-woven fabrics.
After washing, plastic films usually retain a considerable amount of water. Their low bulk density and flexible structure can also make transportation, storage and feeding into downstream equipment difficult.
This system combines screw press dewatering with a densification process to remove a significant portion of the residual water and increase the bulk density of the processed material. The resulting densified material is easier to convey and feed into subsequent extrusion and pelletizing equipment.
Chenxing provides different machine configurations according to material characteristics, processing capacity and downstream production requirements.
The screw press squeezer and densifier is mainly used in the post-washing section of plastic film recycling lines.
Typical processing materials include:
PE Plastic Film: Washed polyethylene film from industrial and post-consumer recycling streams.
PP Woven Bags: Cleaned polypropylene woven bags after shredding and washing.
Agricultural Film: Washed agricultural films, subject to material condition and equipment configuration.
Non-Woven Fabrics: Suitable non-woven plastic materials, depending on their composition and structure.
Other Lightweight Plastic Films: Customized processing solutions can be evaluated according to the actual material.
The suitability of different materials should be confirmed through sample testing before final equipment selection.
The system combines mechanical squeezing and material densification to prepare washed plastic films for subsequent processing.
Washed plastic films or other suitable lightweight plastic materials are conveyed into the machine through the feeding section.
A stable feeding arrangement helps maintain continuous operation and consistent material flow.
Inside the screw press section, the rotating screw conveys and compresses the material.
Mechanical pressure forces a substantial portion of the retained water out of the plastic film. The separated water is discharged through the machine's drainage structure.
This mechanical dewatering stage reduces the amount of water carried into the downstream densification process.
The compressed plastic material undergoes a densification process. Mechanical friction and controlled processing conditions help soften and compact the lightweight material.
The material becomes denser and more suitable for conveying and feeding into downstream equipment.
The actual densification mechanism and temperature-control arrangement depend on the machine configuration.
The densified plastic material is discharged from the machine for transfer to a storage system, extruder or pelletizing line.
The final material form depends on the processed polymer, machine settings and equipment design.
The screw press applies mechanical compression to washed plastic films, removing a substantial portion of the retained water before further processing.
Plastic films and woven bags are lightweight and bulky. Densification helps reduce their loose volume and improves material handling.
The denser material is generally easier to convey and feed into suitable extrusion and pelletizing systems than loose washed film.
The system can be installed after the washing and initial dewatering stages of a PE/PP film recycling line.
Different machine configurations can be evaluated according to the type of plastic material, required throughput and downstream equipment.
The following table presents the model information currently listed for the CX series. Please confirm all dimensions, parameter definitions and electrical specifications before publication or quotation.
| Parameter | CX-500 | CX-1000 |
|---|---|---|
| Machine Model | CX-500 | CX-1000 |
| Main Motor Power | 90 kW | 160 kW |
| Screw Speed | 42 r/min* | 42 r/min* |
| Processing Capacity | 500–600 kg/h* | 700–800 kg/h* |
| Hydraulic Station Motor | 1.5–2.2 kW | 1.5–2.2 kW |
| Machine Dimensions | To be confirmed | To be confirmed |
| Feeding Inlet Dimensions | To be confirmed | To be confirmed |
| Water Discharge | Bottom drainage | Bottom drainage |
| Material Discharge | Free-falling discharge | Free-falling discharge |
The listed speed and processing capacity should be verified under the specified material and operating conditions. Final throughput depends on material properties, moisture level and machine configuration.
The screw press squeezer and densifier is typically installed in the downstream section of a plastic film washing line.
A typical process arrangement may include:
Belt Conveyor
Plastic Film Shredder or Crusher
Friction Washer
Floating Washing Tank
Screw or Centrifugal Dewatering Equipment, where required
Screw Press Squeezer and Densifier
Material Conveying and Storage
Plastic Extrusion and Pelletizing Equipment
The actual process layout depends on the incoming material, contamination level, required final moisture content and pelletizing requirements.
For applications requiring further moisture reduction, an additional drying stage may be evaluated.
Before choosing a screw press squeezer and densifier, buyers should consider the following factors:
Material Type
Specify whether the material is PE film, PP woven bags, agricultural film, non-woven fabric or a mixed plastic stream.
Initial Moisture Content
Provide the moisture level after the washing and preliminary dewatering stages. This information helps determine the required dewatering configuration.
Required Processing Capacity
The target throughput should be specified in kg/h. Actual capacity needs to be evaluated using representative material samples.
Downstream Equipment
The required material condition depends on whether the densified output will be fed into a storage system, single-stage extruder, two-stage pelletizing line or another processing machine.
Available Installation Space
The machine layout, feeding conveyor, drainage system and discharge arrangement should be considered during project planning.
It is designed for suitable washed lightweight plastic materials, including PE films, PP woven bags, agricultural films and non-woven fabrics. Material compatibility should be confirmed according to the actual composition and condition.
The moisture reduction depends on the initial moisture content, material characteristics, processing capacity and operating conditions. A specific final moisture value should be confirmed through material testing.
The machine produces densified plastic material. Its shape, size and bulk density depend on the material and machine configuration. It should not automatically be described as finished plastic pellets.
The two machines use different dewatering principles. A screw press applies mechanical compression, while a centrifugal dewatering machine uses centrifugal force. They may serve different positions in a recycling line and can be selected or combined according to process requirements.
Yes. The densified material can be conveyed to suitable downstream extrusion and pelletizing equipment. The feeding arrangement should be evaluated according to the extruder design and material characteristics.
Machine configuration and processing capacity can be evaluated according to the material type, required throughput, installation space and downstream process.
Looking for a screw press squeezer and densifier for your PE film recycling line or PP woven bag washing project?
Send us your material type, initial moisture content, target processing capacity and downstream equipment information. Our engineering team can evaluate a suitable configuration for your recycling process.
Contact Chenxing Machinery for technical consultation and a customized quotation.



Laser Marking Machine vs. Ink Transfer Printer: Differences, Applications and Buying GuideIn plastic pipe extrusion and manufacturing, product identification is an essential part of production. Every pipe may need permanent or continuous markings, including the manufacturer's name, product model, sp
Twin-Screw Extruder Technology: Engineering Excellence in Plastic Compounding and ProcessingTwin-screw extrusion technology stands at the forefront of modern plastic processing, offering capabilities that single-screw systems cannot match. These sophisticated machines deliver superior mixing perform
Introduction: Why Accurate Liquid Dosing Matters in PVC ProductionIn modern PVC processing and plastic compounding, formulation precision directly determines product quality, stability, and production efficiency. Whether manufacturing PVC pipes, profiles, sheets, or granules, liquid additives such a
Extrusion can be a manufacturing method by which the vinyl material is then melted and molded into a profile. Extrusion can provide such things as weatherproofing, piping, fencing, deck railings, window frame pictures and cladding coatings, and cable insulation.The following process is started by co
Over 60% of US manufacturers are adopting digital controls. Discover how IoT-enabled smart dosing systems with real-time monitoring, AI analytics, and predictive maintenance are transforming Industry 4.0 plastic manufacturing.How IoT-Enabled Dosing Systems Are Redefining Smart ManufacturingIndustry
Upgrade your extrusion line with a 16-zone single screw extruder control system for higher precision, stability, and production efficiency.
Introduction: Why 3D Filament Extrusion Lines Matter in Additive ManufacturingWith the rapid growth of additive manufacturing, the demand for stable, high-precision filament materials has increased dramatically. Whether used in industrial prototyping, education, consumer products, or engineering par
Quick Answer The global plastic pipe market is worth roughly USD 90.1 billion in 2026 and is growing at about 5.4% per year through 2034 (Fortune Business Insights).The fastest-growing sub-segment is data center cooling pipe, sized at USD 2.06 billion in 2026 and forecast to reach USD 6.53 billion b
If you’re involved in plastic manufacturing, you've likely encountered the term “extrusion die.” But what exactly is an extrusion die, and how does it function? In this post, we’ll break down the essential elements of extrusion dies and explain how they contribute to the production of high-quality p
Your Ultimate Guide to PVC Mixing EquipmentPVC compounding mixers are indispensable in modern plastic manufacturing, enabling precise blending of raw materials like PVC resin, stabilizers, plasticizers, and additives. These machines ensure uniformity, quality, and efficiency in producing PVC-based p
High-speed mixers play an important role in plastic compounding by blending polymers, additives, fillers and pigments into a uniform mixture. In PVC processing, high-speed hot mixers use mechanical shear and frictional heating to promote material dispersion and prepare PVC dry blends for extrusion a
When planning to invest in a single wall corrugated pipe production line, one important question often comes up: Should you choose a high-speed machine or a low-speed model?Both types of machines can produce single wall corrugated pipes, which are widely used in electrical cable protection, automoti
With building materials evolving rapidly, PVC wall panels have emerged as a go-to solution for interior finishing across residential, commercial, and industrial spaces. Their water resistance, low maintenance, and decorative versatility make them suitable for bathrooms, kitchens, and public environm
The cost of setting up a PVC pipe production line depends on production capacity, pipe diameter range, automation level, and auxiliary equipment.A small PVC pipe production line may cost between $30,000 and $80,000, while a fully automatic high-output line can exceed $300,000.Key equipment includes:
Title: Meta Description: Zhangjiagang Chenxing Machinery Co., Ltd. successfully ships a high-efficiency PE PP waste washing and recycling line to Russia, marking another milestone in their international expansion.Zhangjiagang Chenxing Machinery Co., Ltd. Ships PE PP Waste Washing and Recycling Line
In modern plastic recycling and waste reduction systems, shredding is the first and most critical stage of material size reduction. Whether you are processing plastic lumps, pipes, films, woven bags, pallets, or industrial scrap, choosing the correct shredder type directly affects downstream crushin
Explore the engineering principles of 3D filament extrusion lines. Learn how polymer science, precision mechanics, and IoT integration enable production of high-tolerance filaments for industrial 3D printing.
Introduction: Why Twin Screw Extruders Are Essential for PVC ProcessingIn modern plastic extrusion manufacturing, twin screw extruders are widely recognized as the most reliable solution for processing difficult-to-melt materials such as PVC powder and high-filled compound formulations.Compared with
Just as cars require regular maintenance, your factory’s plastic pipe extrusion system, particularly the single screw extruder, also needs diligent servicing. Proper daily maintenance not only minimizes the risk of equipment failure but also extends the lifespan of your plastic pipe extrusion operat

