loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
telegram sharing button
sharethis sharing button

3-Layer PE Pipe Co-Extrusion Line | A/B/A Multilayer Pipe Production Equipment with Main and Satellite Extruders

Availability:
Quantity:

Product Description

Product Overview

The 3-Layer PE Pipe Co-Extrusion Line is designed to manufacture multilayer polyethylene pipes through a synchronized extrusion process.


The production line uses a main extruder and satellite co-extruders to feed different polymer melts into a multilayer co-extrusion die. The melts are combined to form a multilayer pipe structure, such as A/B/A, in which the inner, middle and outer layers can have different material formulations or functions.


Compared with conventional single-layer extrusion, multilayer co-extrusion provides greater flexibility in material distribution, layer design and product appearance.


Depending on the pipe application and material requirements, the line can be configured with suitable extruders, co-extrusion dies, vacuum calibration tanks, cooling tanks, haul-offs and cutting equipment.


Chenxing Machinery provides customized PE pipe co-extrusion solutions according to pipe diameter, material formulation, layer ratio, production capacity and downstream requirements.

main high speed single screw extruder with co extrusion satellite extruders for 3 layer HDPE pipe production line
caterpillar haul off and planetary cutter producing 3 layer PE100 pipe for gas and water supply


1. What Is a 3-Layer PE Pipe Co-Extrusion Line?

A 3-layer PE pipe extrusion line combines three polymer melt streams through a specially designed co-extrusion die.

A typical A/B/A structure consists of:

  • Layer A – Inner Layer: The material formulation selected for the pipe's internal surface and application requirements.

  • Layer B – Middle Layer: A separately formulated core layer that may serve specific material, structural or functional requirements.

  • Layer A – Outer Layer: The outer material layer, designed according to the required surface, environmental and application properties.

The actual material composition and layer ratio depend on the intended pipe application and applicable product specifications.

For example, a three-layer structure may use a 25/50/25 or 20/60/20 inner/core/outer ratio. These are illustrative configurations rather than universal standards.

For pressure pipes, all material layers and the finished pipe structure must be evaluated against the applicable product standards. A multilayer design does not automatically qualify a pipe for pressure, drinking-water or gas applications.



2. Working Principle of the 3-Layer Co-Extrusion Line

The production process combines three extrusion streams into one multilayer pipe.

Step 1: Material Preparation and Feeding

Different polymer compounds are prepared according to the required layer formulations.

The materials are fed to the main extruder and satellite co-extruders through suitable feeding arrangements.

For projects involving multiple formulations, an automatic weighing and dosing system can be considered to improve material feeding consistency.


Step 2: Main Extrusion

The main extruder processes the polymer material for the designated primary layer.

The screw and barrel design, temperature settings and operating speed are selected according to the polymer grade, output requirement and processing conditions.


Step 3: Satellite Co-Extrusion

The satellite extruders process the materials for the additional layers.

Each extruder supplies a separate melt stream to the co-extrusion die. The output of each extruder must be matched to the required layer ratio.

Stable material feeding, melt pressure and temperature control are important for maintaining consistent layer distribution.


Step 4: Three-Layer Co-Extrusion Die

The individual melt streams enter the multilayer die head, where they are combined to form the required pipe structure.

The die design distributes the polymer melts around the pipe circumference and controls the formation of the inner, middle and outer layers.

Final layer distribution depends on die design, material compatibility, melt properties, extrusion output and processing conditions.


Step 5: Vacuum Calibration and Cooling

The extruded pipe enters the vacuum sizing system.

Vacuum calibration controls the pipe's outer diameter, while spray cooling removes heat and helps the pipe solidify.

The cooling configuration and line speed should be matched to pipe diameter, wall thickness, material and production output.


Step 6: Haul-Off and Cutting

The haul-off unit pulls the pipe forward at a controlled speed.

A suitable cutting machine cuts the pipe to the required length. Planetary cutting or other cutting arrangements can be selected according to pipe diameter, wall thickness and material characteristics.

Additional downstream equipment, such as pipe belling or socketing machines, can be integrated when required.

vacuum sizing tank with spray cooling on triple layer HDPE pipe extrusion line


3. Main Components of the 3-Layer PE Pipe Extrusion Line

High-Speed Main Extruder

The main extruder provides the primary polymer melt stream.

Its screw diameter, L/D ratio, drive power and screw configuration should be selected according to the material and target output.


Satellite Co-Extruders

The satellite extruders supply the additional melt streams required for multilayer pipe production.

Their output capacity and screw design are matched to the layer structure and material formulation.

Independent temperature control and suitable output adjustment help maintain stable co-extrusion conditions.


Three-Layer Co-Extrusion Die Head

The multilayer die head combines the melt streams into an A/B/A pipe structure.

Its flow channel design is important for melt distribution, layer thickness control and interlayer bonding.

The die should be designed according to the pipe diameter range, material compatibility and required layer configuration.


Vacuum Sizing Tank

The vacuum sizing tank controls the pipe's outer diameter during initial cooling.

Its sizing sleeves, vacuum arrangement and water circulation system are selected according to the pipe specification.


Cooling Tank

The cooling tank removes heat from the extruded pipe to support dimensional stability and downstream handling.

The required cooling length depends on pipe dimensions, line speed and material properties.


Multi-Caterpillar Haul-Off

The haul-off system provides stable traction and synchronized pipe movement.

The number of caterpillars and drive configuration depend on pipe diameter, wall thickness and pulling force requirements.


Pipe Cutting Machine

A planetary cutter or another suitable cutting system can be selected according to the pipe dimensions and cutting requirements.

Chipless cutting can be considered for suitable applications where clean cutting and reduced chip generation are required.


PLC Control System

A PLC and HMI can coordinate the main extruder, satellite extruders and downstream equipment.

Depending on the control configuration, the system can provide parameter setting, temperature monitoring, line-speed coordination, alarms and production data recording.

Recipe storage and automatic layer-ratio adjustment should be confirmed according to the actual control system functions.



4. Technical Specifications

The following table reflects the model configurations currently listed on the product page. Final specifications, output figures and machine combinations should be confirmed by Chenxing's engineering team before quotation.

Line Model Pipe OD Range Main Extruder Co-Extruders Listed Output
3L-63 20–63 mm SJ-75/38 SJ-60/40 + SJ-45/30 200–450 kg/h
3L-110 20–110 mm SJ-75/38 SJ-60/40 + SJ-45/30 300–600 kg/h
3L-250 50–250 mm SJ-90/38 SJ-60/40 + SJ-45/30 500–900 kg/h
3L-450 110–450 mm SJ-90/38 or SJ-120/38 SJ-60/40 × 2 700–1,200 kg/h
3L-630 315–630 mm SJ-120/38 SJ-60/40 × 2 900–1,400 kg/h

Technical Notes:

  • Listed outputs are reference figures and must be verified for the specified material, pipe diameter, wall thickness and operating conditions.

  • Actual production capacity depends on the polymer grade, SDR, layer ratio, extruder configuration, die design and cooling conditions.

  • The notation in extruder models should be confirmed by the equipment manufacturer.

  • Final machine configurations may differ according to project requirements.



5. Key Features of the 3-Layer PE Pipe Extrusion Line

Flexible Multilayer Structure

The co-extrusion system allows different material formulations to be assigned to separate pipe layers.

This provides flexibility in product design and material distribution.


Independent Layer Feeding

The main and satellite extruders supply separate melt streams.

Their outputs can be matched to the required layer structure through suitable feeding and process control arrangements.


Customized Co-Extrusion Die

The multilayer die is designed according to pipe diameter, layer configuration and material characteristics.


Integrated Downstream Equipment

Vacuum calibration, cooling, haul-off and cutting equipment are coordinated with the extrusion system to support continuous pipe production.


Multiple Pipe Specifications

Different line models can cover different pipe diameter ranges. The actual changeover range depends on the selected die sets, calibration sleeves and downstream configuration.


Optional Automatic Material Feeding

An automatic weighing and dosing system can be integrated to manage material preparation and feeding for different formulations.



6. Materials and Applications

The line can be evaluated for compatible PE-based and other polyolefin pipe applications, subject to the required screw, die and downstream configuration.

PE and HDPE Pipes

Multilayer PE pipe structures can be designed for different industrial and infrastructure applications.

For pressure pipe production, the material selection and finished pipe construction must comply with the applicable product standards and customer specifications.


MDPE Pipes

MDPE processing can be considered where the required resin grade, pipe dimensions and extrusion configuration are suitable.


PP and PPR Pipes

Polypropylene and PPR multilayer pipe production requires material-specific processing conditions and suitable extrusion configurations.

Dedicated PPR configurations should be evaluated separately from standard HDPE pipe setups.


Other Multilayer Pipe Applications

Specialized multilayer structures can be considered according to the required material combination, barrier properties, product construction and target application.

Not every multilayer pipe structure can be produced by simply changing the screw or die. Some products require additional processing equipment.



7. How to Select a 3-Layer Pipe Extrusion Line

Before selecting a multilayer pipe production line, buyers should confirm the following requirements.

Pipe Material

Specify the polymer grade and material formulation for each layer.

Pipe Diameter Range

Provide the minimum and maximum outside diameter, including the main production sizes.

Wall Thickness and SDR

Specify the target wall thickness or SDR range. These parameters affect extrusion output, cooling requirements and line speed.

Layer Structure

Confirm whether the required pipe structure is A/B/A or another multilayer arrangement.

Layer Ratio

Provide the required inner, middle and outer layer proportions by weight or another agreed measurement basis.

Production Capacity

Specify the required output in kg/h or meters per minute for the target pipe dimensions.

Product Standards and Application

Identify whether the pipe is intended for water supply, gas distribution, irrigation, drainage or industrial use.

The applicable product standards and material restrictions must be confirmed before selecting the machine configuration.

Factory Conditions

Provide the available installation space, power supply, cooling-water conditions and other utility requirements.



8. Frequently Asked Questions

Q1: What is the advantage of a 3-layer PE pipe extrusion line?

A three-layer co-extrusion line allows different material formulations to be processed in separate layers. This provides greater flexibility in material distribution, pipe design and product appearance compared with a conventional single-layer structure.


Q2: Can the middle layer use recycled PE?

The feasibility depends on the source and quality of the recycled material, the pipe application and the applicable product standard.

For pressure pipe applications, material eligibility must be verified carefully. External recycled material should not be assumed to be acceptable under ISO 4427 or EN 12201 requirements.


Q3: Can the line produce PE100 pressure pipes?

The line can be configured for PE pipe production, but finished-pipe compliance depends on the approved material compounds, pipe design, processing conditions and product testing.

The extrusion equipment alone cannot guarantee a particular pressure rating or standard compliance.


Q4: Can the line produce both HDPE and PPR pipes?

This depends on the machine configuration, screw design, die sets, temperature control and downstream equipment.

HDPE and PPR should be evaluated as separate processing applications. A dedicated configuration may be required for each material.


Q5: Can the layer ratio be adjusted?

The layer ratio can be adjusted within the operating range of the selected extruders, feeding system and co-extrusion die.

The available adjustment range should be confirmed for the required pipe dimensions and material formulations.


Q6: Can the line produce PPR-AL-PPR pipes?

A conventional three-layer plastic co-extrusion line should not automatically be considered suitable for PPR-AL-PPR production.

Aluminum-plastic composite pipe manufacturing may require additional aluminum strip forming, welding, bonding and composite processing equipment. The complete product structure must be reviewed before proposing a production solution.


Q7: Can the line be integrated with an automatic compounding system?

Yes. An automatic material weighing and feeding system can be considered to support formulation preparation and material supply.

The required system depends on the number of materials, layer formulations and production arrangement.


Q8: Does Chenxing provide installation and commissioning?

Installation, commissioning and operator training can be discussed according to the project scope, destination country and agreed service arrangements.



9. Customized 3-Layer PE Pipe Extrusion Solutions from Chenxing

Chenxing Machinery supplies plastic pipe extrusion equipment and customized production line solutions.

For a multilayer pipe project, our engineering team evaluates:

  • Pipe material and resin grade

  • Pipe diameter and wall thickness

  • Required layer structure and ratio

  • Main and satellite extruder configurations

  • Co-extrusion die design

  • Vacuum calibration and cooling requirements

  • Haul-off and cutting arrangements

  • Automation and material feeding requirements

  • Factory layout and utility conditions

Our goal is to configure an extrusion line that matches the actual pipe product, production target and manufacturing conditions.



Request a Customized 3-Layer Pipe Extrusion Line Quotation

Planning to manufacture multilayer PE or HDPE pipes?

Please send us your pipe drawings or specifications, material information, diameter range, SDR, target output and layer structure.

Chenxing Machinery can evaluate the required extruder configuration, co-extrusion die and downstream equipment for your project.

Contact our team to discuss your multilayer pipe production requirements and request a customized quotation.

Zhangjiagang-Chenxing-Machinery-Co-Ltd-Zhangjiagang-Chenxing-Machinery-Co-Ltd- (2)Zhangjiagang-Chenxing-Machinery-Co-Ltd- (1)




Previous: 
Next: 

Fill in your material type, product specification and capacity requirement. Our engineer will contact you within 24 hours.

Related Products

Related Articles

      Contacts
Phone:+8615951187228
Email:ceo@cxsljx.com
  Address:No.188,Zhenbei Road, Leyu                             Town, Zhangjiagang City,                               Jiangsu Province
Social Media
© Copyright 2026 Chenxing Machinery All Rights Reserved.
We use cookies to enable all functionalities for best performance during your visit and to improve our services by giving us some insight into how the website is being used. Continued use of our website without having changed your browser settings confirms your acceptance of these cookies. For details please see our privacy policy.
×