 |
| Quantity: | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Product Description
Developing a new plastic material formulation involves more than selecting the right raw materials. Manufacturers and material developers also need to evaluate how different ingredients behave during mixing and subsequent processing.
Polymer formulations may contain base resins, pigments, stabilizers, lubricants, fillers and functional additives. The combination and proportion of these ingredients can influence the processing behavior and final product characteristics.
The Chenxing SHR-10A 10L Laboratory High Speed Mixer is designed to support small-batch plastic powder mixing and formulation development.
It provides a laboratory-scale solution for preparing material blends, evaluating additive combinations and conducting preliminary mixing trials before moving to larger-scale production equipment.
Laboratory mixing helps material developers prepare controlled batches for preliminary evaluation.
It can support several stages of the development process.
Prepare different combinations of polymer powders and formulation ingredients according to the proposed recipe.
Evaluate suitable additive combinations and compare different formulation ratios.
Prepare small quantities of material for preliminary color formulation and pigment distribution evaluation.
Observe material behavior during mixing and evaluate process conditions such as mixing time and temperature.
Prepare trial batches for downstream processing and evaluate whether the formulation should proceed to pilot or industrial production.
Laboratory mixing is a preliminary development stage. Results should be validated under the actual processing conditions before being adopted for full-scale production.
The 10L total vessel capacity is suitable for small-scale material preparation. The previously published effective working volume is approximately 7L.
The high-speed mixing mechanism generates intensive material movement to support powder blending and ingredient distribution.
The existing SHR-10A technical guide lists a spindle speed of 2000 rpm. This value should be checked against the final machine configuration before publication or quotation.
The standard configuration described in the technical guide uses self-friction heating during the high-speed mixing process.
The PLC-based control configuration supports automated operation and repeatable laboratory procedures.
Depending on the customer's process, the manufacturer can discuss heating configuration, discharge-port design and vessel material.
The above technical information is based on the current SHR-10A product guide.
The SHR-10A can be evaluated for suitable powder-based plastic formulation work, including:
Development Task | Example Application |
|---|---|
PVC formulation | PVC resin and compatible additive blending |
Pigment evaluation | Preliminary plastic color formulation |
Additive testing | Small-batch additive distribution trials |
Filler blending | Evaluation of suitable powder filler formulations |
Polymer material preparation | Small-batch preparation of compatible plastic powders |
Pilot material preparation | Preparing trial material before downstream processing |
The suitability of each material depends on its physical form, bulk density, thermal behavior and mixing requirements.
A laboratory mixer helps developers prepare and evaluate small material batches before investing in larger production runs.
A typical development process may involve:
Stage 1 – Formulation Planning
Determine the polymer, additive types and target formulation.
Stage 2 – Laboratory Mixing
Prepare a small batch using the SHR-10A laboratory mixer.
Stage 3 – Material Evaluation
Evaluate the prepared blend through the appropriate downstream testing or processing procedure.
Stage 4 – Formulation Adjustment
Modify the material proportions or mixing conditions according to the test results.
Stage 5 – Pilot or Industrial Validation
Transfer the selected formulation to larger equipment and validate the process under actual production conditions.
The SHR-10A is intended to support laboratory development. Industrial scale-up still requires engineering validation because mixing geometry, material loading, heat generation and process conditions change with equipment size.
Comparison | SHR-10A Laboratory Mixer | Industrial High Speed Mixer |
|---|---|---|
Main function | Laboratory formulation preparation | Production-scale material mixing |
Capacity | 10L total vessel volume | Larger vessel configurations |
Typical application | R&D and small-batch trials | Industrial production |
Main users | Laboratories and material developers | Plastic manufacturing plants |
Selection priority | Trial flexibility and process evaluation | Batch capacity and production requirements |
When selecting a laboratory mixer for polymer R&D, consider the following factors.
Material Form
Determine whether your materials are powder, pellets, granules or flakes. The SHR-10A is positioned for suitable powder mixing applications.
Formulation Ingredients
List all base materials, additives, pigments and fillers.
Batch Quantity
Confirm the amount required for each trial and compare it with the effective working volume.
Temperature Requirements
Determine whether the process uses friction heating, additional heating or cooling.
Mixing Procedure
Define the required mixing time, operating conditions and material discharge procedure.
Future Production Plan
If the formulation will eventually be used in industrial production, discuss the intended scale-up process when selecting the laboratory configuration.
A plastic formulation mixer is equipment used to blend polymer materials with suitable additives and other ingredients during material preparation and formulation development.
A 10L laboratory mixer allows material developers to prepare small batches for preliminary evaluation without using a larger production mixer for every formulation trial.
It can be evaluated for suitable plastic powder formulations. Each material combination should be assessed according to its physical properties and processing requirements.
It can be considered for suitable powder-based color and additive formulation trials. It should not be confused with a complete masterbatch compounding and pelletizing production line.
Laboratory results can provide useful starting data for scale-up. However, the larger machine and production process must be validated because equipment geometry, loading and heat transfer conditions differ.
Please provide your material types, formulation ingredients, batch quantity, target mixing temperature, desired heating arrangement and local electrical requirements.
Need a laboratory mixer for polymer research, formulation development or small-batch material preparation?
The Chenxing SHR-10A provides a compact high-speed mixing solution for suitable plastic powder applications.
Contact our team with your material details and laboratory requirements to discuss the appropriate configuration.
