An EVA swimming pool hose looks like a simple flexible tube. In reality it is a product with a hard specification: it must float, it must not kink, it must survive chlorinated pool water for years, and it must stay gas and liquid tight at every cuff. Five market realities shape how the line must be built.
A pool hose that sinks is unusable, and one that cannot be seen is a safety and service problem.
Response: the hose is produced in floating EVA/PE construction so it stays on the water surface and is easy to observe and retrieve, matching the material behaviour pool owners already buy today.
The most common complaint about pool hoses is kinking at the bend and cracking at the cuff.
Response: the extrusion line runs highly flexible material that prevents cracking problems, and hose ends are finished with swivel cuffs that rotate to eliminate kinks, supplied in two versions — an easy-to-use swivel cuff or a fixed cuff — so distributors can offer both ranges from one machine.
Chlorine, salt and UV exposure attack low-grade materials within a season.
Response: the hose is formulated and extruded to be durable in use with a crush-proof structure, high tensile strength and extreme tearing resistance, and it withstands exposure to pool chemicals, with a working temperature of -20 to +65 centigrade and flame resistance for added safety.
Water flow, abrasion resistance and hose flexibility pull in different directions on a single tube.
Response: the line produces hose with a smooth interior and corrugated exterior — low flow resistance inside, flexible and abrasion-resistant outside — while the finished product remains gas and liquid tight.
Pool hose is sold by diameter, by cut length, by gram weight and by colour.
Response: the line offers customized service with different colours, lengths, sizes and gram weights, so one platform can supply several SKUs. Chenxing handles this kind of customization across its pipe and hose lines as standard practice.
The EVA Swimming Pool Hose Extrusion Machine / Vacuum Cleaner Hose Plastic Manufacturing Machine is a complete single-screw hose extrusion line that produces flexible corrugated hose for pool cleaning equipment and vacuum cleaner applications. The hose is widely used with pool vacuum heads and automatic cleaners, and is equally suitable for household and industrial fields.
Model NO.: single screw extruder (models SJ45, SJ55, SJ65)
Screw No.: single-screw, extruder type single screw extruder
Raw material: PE / EVA
Material of screw and barrel: 38CrMoAlA
Motor brand: Siemens Beide
Inverter brand: ABB
Temperature controller: Ormon
Relay: Delixi
Capacity: 60-100 kg/h
Speed: 3-20 m/min
Industrial voltage: based on customer requirement
Certification: CE, ISO9001:2008
Transport package: wooden case and PE film
After-sales service: 12 months
HS code: 84772090
Production capacity: 500 sets / year
Widely used with pool vacuum head and automatic cleaner, suitable for household and industrial field
Flame resistance, working temperature -20 to +65 centigrade
Highly flexible, preventing cracking problems
Floatable and easy to observe and get
Smooth interior, corrugated exterior
Durable to use with crush-proof structure, high tensile strength, extremely tearing resistant, withstands exposure to pool chemicals
Gas and liquid tight
Customized service with different colours, lengths, sizes and gram weights
Swivel cuffs rotate to eliminate kinks
Two options of the cuffs: one with easy-to-use swivel cuff, the other with fixed ones
| Model | Diameter range (mm) | Output (kg/h) | Installed power (kW) |
|---|---|---|---|
| FST45 | 13-50 | 30-50 | 35 |
| FST65 | 65-110 | 50-100 | 50 |
The FST45 covers the small-bore hose used on domestic pool cleaners and vacuum cleaners, while the FST65 moves up to the larger diameters used on commercial pool cleaning sets. The complete product family is presented in the pipe extrusion line overview, including the other type pipe extrusion line solution where flexible and special-profile hose belongs.
The extruder is a single-screw design with a 38CrMoAlA screw and barrel, driven by a Siemens Beide motor with an ABB inverter and zone heating controlled by Ormon temperature controllers with Delixi relays. PE and EVA are extruded at a controlled melt temperature so the corrugated profile forms cleanly without internal stress. Compare the wider extruder program, or the laboratory-scale SJ 25/25 mini single screw extruder and SJ 30/28 co-extrusion laboratory extruder for trial runs.
The corrugated exterior that gives the hose its flexibility and crush resistance is formed immediately after the die, with the profile closed in line while the smooth bore is held internally. The result is a hose with low flow resistance inside and high flexibility outside — produced at line speed 3-20 m/min depending on diameter and wall thickness.
Cooling follows forming, then a matched take-off pulls the hose at constant tension so wall thickness and corrugation pitch stay consistent along the coil. For producers who also run rigid pipe downstream, similar equipment is described in the HDPE pipe production line and the PPR pipe extrusion line solution.
Finished hose is cut to length and fitted with end cuffs. Both cuff styles are available — the swivel cuff that rotates to eliminate kinks and the fixed cuff — and customers can specify colour, length, size and gram weight to match their market.
The hose produced on this line is used wherever a tough, floating, chemical-resistant flexible tube is needed:
Swimming pool vacuum hose with pool vacuum heads and automatic pool cleaners
Vacuum cleaner hose for household and commercial cleaning equipment
Garden and irrigation hose — related lines are covered in our applications section
Industrial flexible hose for gas and liquid transfer, where a gas and liquid tight tube is required
Flexible soft pipe — see also the PVC fiber reinforced soft pipe extrusion line
Related construction is produced on the single wall corrugated pipe extrusion line, the double wall corrugated pipe extrusion line and the corrugated pipe extrusion line solution.
Each machine is packed in a wooden case with PE film protection, ready for sea freight:
| Packing item | Specification |
|---|---|
| Transport package | Wooden case and PE film |
| Package size | 150.00 cm x 120.00 cm x 110.00 cm |
| Package gross weight | 800.000 kg |
| HS code | 84772090 |
| Production capacity | 500 sets / year |
Shipping cost is quoted according to destination port and order scope, and the final packing list is confirmed together with the quotation.
Zhangjiagang Chenxing Machinery Co., Ltd. is a professional factory with more than 20 years of experience building plastic machinery: double-screw and single-screw extruders, PVC/PE/HDPE/PPR pipe lines, PVC WPC and PVC window profile lines, PVC and ABS sheet machines, PVC foaming machines, PP/PE pelletizing machines, wash and recycling lines, and auxiliary machines such as crushers, mixers and pipe belling machines.
Our machines have been sold to many countries around the world — including Egypt, Thailand, Malaysia, India, Russia, Turkey, Zambia, Algeria and Indonesia — and high quality, good service and competitive price have built long-term relationships with our customers. Within the same program you will find the plastic pelletizing line, the plastic recycling line solution, the PE/PP film recycling washing line and the washing line machines for in-house reclaim of EVA and PE scrap. Explore solutions, the profile extrusion line, the board sheet extrusion line and About Us.
Double-screw extruders, single-screw extruders, PVC/PE/HDPE/PPR pipe lines, PVC WPC and PVC window profile lines, PVC and ABS sheet machines, PVC foaming machines, PP/PE pelletizing machines and other auxiliary machines such as crushers, mixers and pipe belling machines.
We have our own factory, and you are welcome to visit at any time.
Yes. Our experienced mechanical designers provide customized design — including hose diameter, colour, cuff type and coil length for pool hose projects.
We have an experienced R&D team that ensures the feasibility of the product before it is put into production, and professional quality inspectors who inspect raw materials before production, conduct patrol inspection during production, and carry out re-inspection before delivery.
We provide high-quality products with a 12-month warranty service, factory-direct pricing and responsive engineering support — the same standard of service behind our 3-layer high speed PE/PPR/HDPE pipe line and flexible hose programs.
Yes. Our engineers will guide the machine installation and train your workers, including extrusion settings for EVA and PE compounds.
T/T, L/C, Western Union, etc., confirmed in the formal quotation.
We can provide technical support such as plant planning according to your requirements, including layout of the extruder, cooling, take-off and coiling stages. More questions are answered on our FAQ list; you can also browse Downloads and Company News.
Tell Chenxing the hose diameters, colours, cut lengths, gram weights and cuff types you need to sell; the team will confirm the extruder model (SJ45, SJ55 or SJ65 / FST45 or FST65), downstream equipment, packing and delivery schedule in a written quotation.
Nicole — Email: ceo@cxsljx.com | Tel WeChat WhatsApp: +86 159 5118 7228
Send your hose specification and destination port, and we will reply within 24 hours.
Still comparing configurations before you decide? view more machine details to cross-check the EVA pool hose and vacuum cleaner hose line against your own specification sheet, then send the differences to Nicole for a matched quotation.