Welcome to Zhangjiagang Chenxing Machinery Co., Ltd.

NEWS CENTER

What is a PVC mixer?

Views: 0     Author: Site Editor     Publish Time: 2022-10-05      Origin: Site

Inquire

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

PVC mixer is a kind of equipment that uses the principle of rapid rotation to achieve the purpose of mixing evenly. It is through the material into the hopper through the spiral spindle transported to the upper end of the barrel, and then fall in an umbrella shape and has been a continuous cycle of mixing, so as to achieve the purpose of uniform mixing. The PVC mixer has the functions of automatic operation timing, overload protection, feeding limit alarm, etc.; and has the advantages of small area, large capacity, low power consumption, labor-saving, convenient control, fast and uniform mixing, etc. It can be widely used in plastic flakes, crushed materials, plastic particles, plastic old and new and add color masterbatch mixing and other applications. This article will briefly introduce the PVC mixer.


The following is the list of contents

  • The working principle of PVC mixer

  • Advantages of PVC mixer

  • Performance characteristics of PVC mixer


The working principle of PVC mixer

Using the rapid rotation of the screw to lift the raw materials from the bottom of the barrel from the center to the top, and then scattered in an umbrella shape, back to the bottom, so that the raw materials roll up and down in the barrel and stir, a large number of raw materials can be mixed evenly in a short time.


Advantages of PVC mixer

  • Automatic operation timing, overload protection, filling limit alarm, and other functions.

  • It has the advantages of small footprint, large capacity, low power consumption, labor-saving, convenient control, fast and uniform mixing, etc.

  • It can be widely used for plastic flakes, crushed materials, powder materials, plastic granules, plastic old and new, and add color masterbatch mixing and other applications.

  • Applicable customers: cutting granules, plastic materials, masterbatch manufacturing, plastic modification, recycling processing of recycled materials, large injection molding, and other industries.


Performance characteristics of PVC mixer

  • Stirring and drying synchronization, as the material in the process of drying, continuous flow state, heat penetration uniform, short drying time and not easy to knot fast.

  • The standard model for the double-layer barrel design (economic model for single-layer design), the inner layer for the material contact part of all stainless steel material manufacturing; the middle sandwich installation, and special insulation materials, and thus can achieve the effect of safety, energy-saving.

  • With a high-frequency heater, fast heating, low power consumption, the comprehensive cost of drying each ton of material is more than 20 tons per ton.

  • Special double-pipe moisture discharge port, which can effectively discharge moisture and collect part of dust without polluting the working environment.

  • The barrel is equipped with an entrance door, so it is simple and quick to change color and material for cleaning.

  • After special modification, the standard model can be easily used for crystallization and drying of plastic granule powder and PET flakes.

  • More models, large capacity, often ready to load once performance: 0, 5T, 1 ton, 1.5 tons, 2 tons, 3 tons, etc.

  • The drying and mixing function is two in one, when there is no need to dry, just turn off the heating switch and fan switch, the standard model can be used for plastic mixing and homogenization purposes, one machine with two uses.


Zhangjiagang Chenxing Machinery Co., Ltd. is committed to providing high-quality, high-performance equipment, if you are interested in our products, welcome to contact us for effective information about the product, we will be happy to serve you.



Zhangjiagang Chenxing Machinery Co., Ltd., its predecessor is Sanxing Plastic Machinery Factory. It evolved into a joint-equity enterprise in 1996 from the former collective enterprise. 

QUICK LINKS

PRODUCTS

CONTACT US

   0086-137-7627-5668

  0086-0512-58609008

  zwp@cxsljx.com

  No.188 Zhenbei Road, Leyu Town,                  Zhangjiagang City, Jiangsu Province,            China

 COPYRIGHT © 2021 ZHANGJIAGANG CHENXING MACHINERY CO., LTD. | SITEMAP | SUPPORT BY LEADONG   苏ICP备11049547号-2