The Double Wheel Printer is an in-line printing machine designed for marking plastic pipes during continuous extrusion production.
It uses a dual-wheel printing structure to transfer ink onto the surface of moving plastic pipes. The machine can be installed directly into PVC, PE, PPR and other compatible plastic pipe extrusion lines to print product specifications, manufacturer information, trademarks, standards and other identification content.
Compared with a single-wheel printing arrangement, the double wheel structure provides a flexible solution for pipe manufacturers that need continuous marking or different printing arrangements on the pipe surface.
The printer can be configured according to the pipe diameter, extrusion line speed, printing content and required marking position.
Typical applications include:
PVC water supply pipes
PVC drainage pipes
PPR hot and cold water pipes
HDPE water pipes
PE gas pipes
PE irrigation pipes
Electrical conduit pipes
Other compatible plastic pipes
For manufacturers producing several pipe specifications on the same extrusion line, the printing mechanism can be adjusted according to the actual product requirements.
A Double Wheel Printer is a mechanical pipe marking machine equipped with two printing wheels.
During operation, the pipe moves continuously through the extrusion line while the printing wheels rotate against the pipe surface. Ink is transferred from the printing mechanism to the moving pipe, creating a continuous identification mark.
The double wheel configuration can be used for different marking arrangements depending on the pipe diameter, printing content and required layout.
The machine is particularly suitable for applications where pipe manufacturers need to print information directly during extrusion instead of carrying out a separate marking process after production.
The basic printing process consists of several stages:
Ink is supplied to the printing mechanism and transferred to the printing wheels.
The two printing wheels rotate as the pipe moves through the production line.
The printing wheels contact the pipe surface and transfer the required characters or markings.
The movement of the pipe and printing wheels creates a continuous marking process.
The printing position, wheel arrangement and printing parameters can be adjusted according to the pipe diameter and required marking layout.
The actual printing result depends on several factors, including:
Pipe material
Pipe surface condition
Ink compatibility
Printing wheel configuration
Pipe production speed
Printing pressure
Character design
Ink drying characteristics
Therefore, the printer should be configured according to the actual pipe and production conditions rather than selected only according to pipe diameter.
The main components of the machine include:
The two printing wheels are the core working components of the machine.
They transfer the selected characters or markings onto the pipe surface during continuous production.
The wheel configuration can be adjusted according to the required marking arrangement.
The ink supply system provides ink to the printing mechanism.
The selected ink should be compatible with the pipe material and provide sufficient adhesion and visibility after printing.
The adjustment structure allows the operator to position the printing wheels according to the pipe diameter and required printing location.
This is particularly useful when the same extrusion line produces different pipe sizes.
The transmission mechanism drives the printing wheels and maintains stable operation during continuous pipe production.
The compact machine frame provides a stable support structure and allows the printer to be installed into an existing pipe extrusion line.
The Double Wheel Printer can be used for marking various plastic pipe products, subject to material and ink compatibility.
PVC pipes are one of the common applications.
The printer can be used to mark:
Pipe diameter
Wall thickness
PVC material information
Manufacturer name
Product standards
Brand information
Production identification
The machine can also be integrated into PE and HDPE pipe extrusion lines.
Typical applications include:
HDPE water supply pipes
PE drainage pipes
PE irrigation pipes
PE gas pipes
Industrial PE pipes
The ink formulation should be selected according to the pipe surface and required adhesion.
For PPR pipe production, the printer can mark:
Pipe dimensions
Pressure class
Material type
Manufacturer information
Application information
Relevant standards
The printing parameters should be matched to the extrusion speed and pipe surface characteristics.
The Double Wheel Printer can be used to print different types of product identification information.
Typical printing content includes:
For example:
PPR PIPE 25 × 2.8 mm
For example:
CHENXING MACHINERY
For example:
ISO / DIN / ASTM
The actual standard information depends on the customer's product requirements and certification system.
Customized manufacturer or product branding can be incorporated into the printing design where supported by the printing wheel configuration.
Manufacturers can also use pipe marking to identify:
Production batches
Product codes
Manufacturing information
Application categories
The exact character arrangement should be confirmed before manufacturing the printing wheels.
The printer is normally used as an auxiliary machine within a complete pipe extrusion line.
A typical production process is:
Raw Material → Extruder → Die Head → Vacuum Calibration → Cooling → Haul-Off → Double Wheel Printer → Cutting → Stacking
For continuous pipe production, the printer should be installed at a suitable position after the pipe has achieved sufficient dimensional stability.
The exact installation location depends on:
Pipe material
Pipe diameter
Cooling arrangement
Production speed
Ink drying requirements
Existing line layout
The printing unit can therefore be designed as part of a new pipe extrusion line or evaluated for integration into an existing production line.
The double wheel structure provides additional flexibility for specific printing applications.
| Feature | Single Wheel Printer | Double Wheel Printer |
|---|---|---|
| Printing Wheels | 1 | 2 |
| Printing Arrangement | Basic | More flexible |
| Continuous Pipe Marking | Yes | Yes |
| Suitable Pipe Production | Standard applications | Standard and multi-marking applications |
| Installation | Compact | Compact |
| Customization | Available | Available |
| Application Flexibility | Standard | Higher |
The suitable configuration depends on the required printing content, pipe dimensions and production process.
A double wheel structure should not automatically be considered better for every pipe application. The correct configuration should be selected according to the actual marking requirements.
The following specifications can be used as the initial product specification framework. Final values should be confirmed according to the actual machine configuration.
| Parameter | Specification |
|---|---|
| Machine Type | Double Wheel Printer |
| Application | Plastic Pipe In-Line Printing |
| Printing Method | Wheel-Type Ink Transfer |
| Applicable Materials | PVC, PE, HDPE, PPR and compatible plastics |
| Printing Wheels | Double Wheel |
| Applicable Pipe Diameter | Approx. 12–250 mm* |
| Production Line Speed | Up to approx. 30 m/min* |
| Printing Height | Approx. 8–30 mm* |
| Installation | In-Line with Pipe Extrusion Line |
| Printing Content | Text, Specifications, Standards, Brand Information |
| Printing Direction | Adjustable according to line configuration |
| Ink Type | Selected according to pipe material and application |
*Final specifications depend on the machine configuration, printing content, pipe material and production conditions.
Important: Before publishing the page, I recommend Chenxing's technical department confirm the exact values for pipe diameter, maximum line speed, character height, printing interval and ink type.
The printer operates directly within the pipe production process, eliminating the need for a separate post-production marking operation.
The dual-wheel arrangement provides additional flexibility for different pipe marking requirements.
The machine can be configured for compatible PVC, PE, HDPE and PPR pipe applications.
The printing mechanism can be adjusted according to pipe diameter and required marking position.
The printer occupies relatively little production space and can be integrated into existing extrusion line layouts.
Manufacturers can specify the required text, product information, standards and branding content.
Choosing a pipe printer should not be based only on the maximum pipe diameter.
Before purchasing, manufacturers should consider the following factors.
Confirm whether the pipe is made from:
PVC
PE
HDPE
PPR
Other plastic materials
Different materials may require different ink formulations.
Provide the minimum and maximum pipe diameters that the printer needs to handle.
For example:
20–63 mm
or
110–250 mm
This helps determine the appropriate adjustment range.
Provide the actual extrusion line speed in metres per minute.
A printer designed for a low-speed extrusion line may not provide the same marking result at a significantly higher line speed.
Tell the supplier exactly what needs to be printed.
For example:
Manufacturer name
Pipe specification
Standard
Logo
Product code
Batch information
The required distance between repeated markings should also be confirmed.
This is particularly important for continuous pipe extrusion.
Ink selection should consider:
Material adhesion
Drying time
Printing contrast
Production speed
Working environment
The machine can be used with different types of pipe extrusion equipment.
Suitable for marking PVC water supply, drainage, conduit and other compatible PVC pipes.
Suitable for continuous identification of HDPE water, gas, drainage and industrial pipes.
Suitable for printing specifications and manufacturer information on PPR plumbing pipes.
Can be integrated into PE irrigation, drainage and other pipe production systems.
This makes the Double Wheel Printer a practical auxiliary machine for plastic pipe manufacturers operating multiple extrusion lines.
A Double Wheel Printer is an in-line pipe marking machine equipped with two printing wheels for transferring ink onto the surface of continuously extruded plastic pipes.
The machine is mainly intended for compatible PVC, PE, HDPE and PPR pipes. The final material compatibility depends on the ink and printing configuration.
Yes. Typical applications include pipe diameter, wall thickness, material information, manufacturer name, standards and other identification content.
Customized text and branding can be evaluated according to the printing wheel design and required marking format.
Yes. The machine can be evaluated for integration with an existing pipe extrusion line. The installation arrangement depends on line layout, pipe dimensions and production speed.
Please provide:
Pipe material
Pipe diameter range
Production speed
Printing content
Printing height
Printing interval
Existing extrusion line information
Required marking position
A sample pipe or photo of the required marking is also helpful.
The applicable speed depends on the printing mechanism, ink, marking content and pipe material. Please provide your actual line speed so the appropriate configuration can be evaluated.
Zhangjiagang Chenxing Machinery Co., Ltd. manufactures plastic extrusion, recycling and auxiliary equipment for international customers.
For plastic pipe production, Chenxing can supply not only pipe printing equipment but also complete extrusion line equipment and related auxiliaries.
Our product range includes:
PVC Pipe Extrusion Lines
HDPE Pipe Extrusion Lines
PPR Pipe Extrusion Lines
Corrugated Pipe Extrusion Lines
Plastic Pipe Haul-Off Machines
Pipe Cutting Machines
Pipe Belling Machines
Double Wheel Printers
Plastic Pipe Winding Equipment
This allows the printing machine to be evaluated as an individual auxiliary machine or as part of a complete plastic pipe production solution.
Looking for a Double Wheel Printer for PVC, PE, HDPE or PPR pipe production?
Send us your pipe specifications and printing requirements.
Please include:
Pipe material
Pipe diameter
Production speed
Printing content
Printing interval
Character height
Existing extrusion line information
You can also send a pipe sample photo or marking sample. Our engineers can evaluate the suitable Double Wheel Printer configuration for your production line.
Zhangjiagang Chenxing Machinery Co., Ltd.
Email: ceo@cxsljx.com
WhatsApp: +86 159 5118 7228
Website: www.chenxingmachinery.com