Looking for a compact bonding machine for metallic powder coating production, formulation development, or small-batch testing? Chenxing's 10L hot mixer + 30L cold mixer bonding machine is designed for exactly this kind of work.
The system combines a 10L high-speed hot mixer with a 30L cooling mixer, allowing metallic pigments to bond with powder coating materials through controlled heat and mechanical mixing. After the bonding process, the material is transferred to the cold mixer for rapid temperature reduction, helping prevent unwanted agglomeration and keeping the finished powder free-flowing.
Unlike a standard dry powder mixer, a metallic bonding machine is designed to attach metallic pigments to the surface of powder coating particles. This helps reduce pigment separation during transportation, spraying, and powder recovery, resulting in more consistent metallic effects.
With its compact design and separate hot and cold mixing chambers, this machine is a practical choice for powder coating manufacturers, R&D laboratories, and businesses that need to develop or process metallic powder coating formulations in small batches.
The bonding process involves two main stages: hot mixing and cold mixing. Each stage has a different job, but both are important for achieving a consistent final product.
The powder coating base material and metallic pigments are added to the 10L hot mixing chamber according to the required formulation.
During high-speed mixing, mechanical friction generates heat and helps bring the powder coating resin close to its softening temperature. Under suitable temperature and mixing conditions, metallic pigments such as aluminum flakes can attach to the surface of the powder coating particles.
The mixing speed, temperature, and processing time need to be adjusted according to the resin formulation and pigment characteristics. Proper process control helps achieve a more uniform bonding result without overheating the material.
Once the hot mixing stage is complete, the bonded material is discharged into the 30L cold mixing chamber.
The cooling mixer uses a water-circulation cooling system to reduce the material temperature while maintaining suitable mixing conditions.
This stage helps:
Prevent powder particles from sticking together.
Reduce the risk of unwanted agglomeration.
Maintain the free-flowing properties of the finished powder.
Prepare the bonded material for subsequent handling, sieving, or packaging.
The separate hot and cold mixing chambers allow the two processes to be carried out efficiently in one compact equipment setup.
| Item | Specification |
|---|---|
| Machine Type | Small Metallic Bonding Machine |
| Hot Mixing Chamber | 10L |
| Cold Mixing Chamber | 30L |
| Hot Mixing Method | High-speed mechanical mixing |
| Heating Method | Friction heating |
| Cooling Method | Circulating water cooling |
| Mixing Configuration | Separate hot and cold mixing chambers |
| Application | Metallic powder coating bonding |
| Equipment Design | Compact small-batch configuration |
Note: The above information covers the basic configuration. Motor power, operating speed, temperature range, batch weight, and other electrical specifications can be confirmed according to the final machine configuration and customer requirements.
The machine combines a 10L hot mixer and a 30L cold mixer in one system. The two-stage design allows the material to undergo bonding and cooling separately, making the process easier to manage.
With a 10L hot mixing chamber, this machine is suitable for customers who do not need a large industrial bonding system. It is particularly useful for small production batches, formulation trials, and metallic powder development.
The hot mixing chamber provides high-speed mechanical mixing to distribute the powder coating base and metallic pigments. With suitable process settings, it helps achieve consistent contact between the resin particles and metallic pigments.
After hot mixing, the material enters the 30L cold mixer. The water-circulation cooling system helps bring down the material temperature and reduces the possibility of powder sticking or forming unwanted lumps.
Different powder coating formulations may require different mixing temperatures, speeds, and processing times. The machine provides a practical setup for testing and adjusting these parameters before moving to larger-scale production.
The straightforward hot-and-cold mixing configuration makes daily operation easier to understand. The mixing chambers can also be cleaned between different formulations to reduce material carryover during product changes.
This small bonding machine is mainly used in the production and development of metallic effect powder coatings.
Typical applications include:
Used to bond metallic pigments with powder coating base materials to produce metallic effect powder coatings with improved pigment attachment and batch consistency.
Suitable for processing formulations containing aluminum and silver-effect pigments, subject to the characteristics of the selected materials.
Can be used for small-batch formulation trials involving copper and other metallic effect pigments. Actual process conditions should be established through material testing.
Provides a practical solution for testing new powder coating formulas, adjusting pigment ratios, and evaluating bonding conditions before scaling up.
Suitable for manufacturers handling limited production volumes, customized color requirements, and frequent formulation changes.
Choosing a bonding machine is not just about the mixing chamber volume. The equipment also needs to match your material characteristics, processing requirements, and actual production plans.
Chenxing Machinery has more than 20 years of experience in plastic processing and industrial mixing equipment manufacturing. We focus on practical machine configurations and provide equipment solutions based on customers' production requirements.
When selecting a bonding machine from Chenxing, you can expect:
Practical equipment configuration: A separate hot and cold mixing design for different stages of the bonding process.
Application-based recommendations: Equipment selection based on your powder coating materials and target batch requirements.
Manufacturing experience: More than 20 years of machinery manufacturing experience.
Customization support: Machine configuration can be discussed according to your voltage, material, and operating requirements.
Technical communication: Our team can discuss the mixing process and help you identify a suitable machine configuration before ordering.
Whether you are developing a new metallic powder coating formulation or looking for a compact machine for small-batch bonding, Chenxing can help you find a suitable solution.
A metallic bonding machine is used to attach metallic pigments to powder coating particles through controlled heat and mechanical mixing. It helps reduce pigment separation and improve the consistency of metallic effect powder coatings during spraying and recovery.
The hot mixer generates heat through high-speed mechanical mixing to help metallic pigments bond with the powder coating resin particles. The cold mixer reduces the material temperature after bonding, helping prevent agglomeration and maintain good powder flowability.
The 10L hot mixer is used for the bonding process, while the 30L cold mixer provides additional space for cooling the processed material. The two chambers are designed to work together as a small-batch bonding system.
It is primarily designed for powder coating base materials and metallic effect pigments, including aluminum, silver, copper, and other compatible pigments. The actual formulation and processing conditions should be confirmed through material testing.
Yes. Its compact configuration makes it suitable for small-batch formulation trials, pigment testing, and process development before transferring the formulation to larger production equipment.
During hot mixing, the powder coating resin reaches a temperature at which metallic pigments can attach to the powder particles. If the material remains hot for too long, particles may stick together or form lumps. Cooling helps stabilize the bonded powder and maintain its handling properties.
Yes. We can discuss the machine configuration according to your material characteristics, local power supply, operating requirements, and other technical needs. Please contact our sales team for further details.
Simply send us your powder coating material information, metallic pigment type, expected batch requirements, and local power supply details. Our team will help check the suitable configuration and provide a quotation.
Need a compact bonding machine for metallic powder coating development or small-batch production?
Tell us what materials you plan to process and what results you expect. Chenxing Machinery can help you evaluate the 10L hot mixer + 30L cold mixer configuration and discuss the right setup for your application.
Contact Chenxing Machinery
Email: ceo@cxsljx.com
WhatsApp: +86 159 5118 7228
Website: www.chenxingmachinery.com
Send us your inquiry today to discuss your bonding machine requirements.